Fast, Thorough Water Damage Restoration
Water damage gets worse every hour it sits. We respond fast, extract the water, dry the structure to industry standard with commercial equipment, and monitor moisture until the building is actually dry. Then we restore and rebuild the affected areas — so the damage stops where it started.
The damage you can't see is the damage that grows mold
Water travels fast — behind baseboards, under flooring, and inside wall cavities where it sits and feeds mold growth within 48 to 72 hours. Surface drying is not enough. We use commercial dehumidifiers and moisture meters to dry the structure to standard, log the readings daily, and treat for mold as we go — because we are also a licensed mold remediator. Then, as a general contractor, we rebuild what was damaged.
- 24-hour emergency response — local, not a call center
- Commercial extraction, drying and dehumidification
- Daily moisture monitoring to dry standard
- Mold prevention and remediation under MRSR142
- Full reconstruction under CGC1535089
Our Process
How water damage restoration works, step by step
From the first emergency call to a fully rebuilt space — a clear, documented process.
Emergency Inspection & Scope
We arrive fast, walk the property with you, and identify the source of the water. Using moisture meters and thermal imaging, we map every wet area — including what you cannot see behind walls and under floors — and document a written scope before equipment goes in.
Water Extraction & Removal
Standing water is extracted with commercial pumps and vacuums. We pull saturated carpet padding, open affected cavities as needed, and remove materials that cannot be saved — so the structure is ready to dry, not just the surface.
Structural Drying & Dehumidification
Commercial air movers and low-grain refrigerant dehumidifiers are placed to move air across every wet surface and pull moisture out of framing, drywall and concrete. The goal is not 'dry to the touch' — it is dried to industry moisture-content standard.
Moisture Monitoring to Dry Standard
We return daily to take moisture readings inside the wall cavities and subfloor, logging the numbers until the structure reaches dry standard. Drying is not done when the fans leave — it is done when the meters say so.
Mold Prevention & Treatment
Because we are also a licensed mold remediator (MRSR142), we treat affected areas with antimicrobial agents during drying to prevent mold from taking hold. If growth has already started, we scope and remediate it correctly — not just dry over it.
Restoration & Rebuild
As a Florida Certified General Contractor (CGC1535089), we reinstall drywall, flooring, baseboards, cabinets and paint — rebuilding the space back to its original condition under one contract. One company, start to finish.
Common in South Florida
Where water damage starts in South Florida homes
Our climate, plumbing, and storms make water losses frequent. These are the sources we see most — and how we handle each one.
Burst & Leaking Supply Lines
A failed washing machine hose, ice-maker line, or pinhole in a copper supply line can dump water fast. We extract the water, dry behind the walls where it traveled, and rebuild the affected drywall, flooring and trim.
AC Air Handler & Drain Pan Overflows
The most common water loss in South Florida homes. A clogged condensate drain overflows the pan and saturates drywall, insulation and flooring around the air handler. We extract, dry the structure, treat for mold, and rebuild the closet.
Water Heater Failures
A rusted or failed water heater releases dozens of gallons in minutes. We extract the standing water, dry the surrounding drywall and subfloor, and coordinate replacement and rebuild — including any flooring damaged by the flood.
Roof Leaks & Wind-Driven Rain
South Florida storms drive water under flashing and around vents, traveling down rafters into ceilings and wall cavities. We locate the path of the water, dry the structure, and restore the ceiling or wall — and coordinate the roof repair.
Appliance & Fixture Failures
A failed dishwasher, toilet supply line, or refrigerator leak can run quietly for days. By the time it is found, flooring and cabinets are saturated. We extract, dry to standard, and replace or restore the affected finishes.
Slow, Hidden Leaks Behind Walls
A slow leak inside a wall cavity may only show as a discolored spot or buckled flooring. We use thermal imaging to find the source without tearing into your home blindly, dry the structure, and rebuild only what was affected.
Water damage? Every hour matters. Call now — we respond 24/7.
Call 954-923-3340Homeowner Questions
Straight answers about water damage restoration
The questions South Florida property owners ask us most — answered plainly.
Have Water Damage, Mold or a Reconstruction Project?
One Company. Start to Finish.